35. Honda Remanufactured Engines

Remanufactured Engine Inquiry/Order Form Page

Find your engine. Enter information into the form at the bottom of this page and press the submit button way down at the bottom.

  Visa

  Walk-in-Cash

  

Wire Transfer from your checking account
Go to your personal banker and tell them to send a wire transfer for the amount total above to remanufactured.com Routing #071921176  Account # 200816380 New Lenox State Bank 110 West Maple, New Lenox Illinois 60451 1-815-485-7550
(Usually a $15 charge at your bank) we reimburse!

Check / Money Order / Cashiers Check

Call  UPS at 1-800-742-5877 until 7 p.m. and press "0" for a free next day air letter pickup. Tell them you have a letter going to remanufactured.com at 2850 S. State St. Lockport IL 60441 and to charge it to their account #172EW9 The driver will have a special envelope to put the check / MO  into and can help with addressing the label. It's a good idea to include a printed copy of this completed form before you press the submit button below.

If you choose to order an engine using this form you will also receive a personal response and confirmation. Although we have very good coverage, if we are out of stock on an item you have selected or if for some reason we can't ship you will be notified via e-mail or phone as to what the status is.

Credit Card Number

Expiration Date

Name on the Credit Card

Cardholder's Address

Zip Code

--If you have unanswered questions and are not ready to order, stop here and press the submit button below or call 1.800.575.6998--

We ship remanufactured engines to Alabama, Alberta, Arizona, Arkansas, British Colombia, California, Colorado, Connecticut, Delaware, Florida, Georgia Idaho, Iowa, Kansas, Kentucky, Louisiana, Maine, Manitoba, Maryland, Massachusetts, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Ontario, Oregon, Pennsylvania, Quebec, Rhode Island, Saskatchewan, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West, Virginia and Wyoming. We are a custom engine remanufacturer and remanufacture engines for all remanufactured engine applications. http://remanufactured-engines.com/ 1997  1996  1995  1994  1993  1992  1991  1990  1989  1988  1987  1986  1985  1984  1983  1982  1981  1980  1979  1978  1977  1976  1975  1974  1973  1972  1971  1970  1969  1968  1967  1966  1965  1964  1963  1962  1961  1960  1959  1958  © Copyright 1997-2001 remanufactured.com Inc. All Rights Reserved remanufactured.com 14401 South Archer Ave. Lockport Illinois 60441 USA Phone: 1.800.575.6998 Fax:1.815.838.4860 Email: engines@remanufactured.com or citizen@msn.com  http://remanufactured.com

--READ ME--                             *WA, OR, CA, NV, ID, MT, WY, UT, AZ add $95 to the round trip shipping price above.

Outside the 48 states ? Email for a quote. If you are close to Northeast Illinois and would like our longblock properly installed by a shop close by add $785. Our longblock engines come with 1 yr/unlimited mileage warranties standard. A 3 yr/50000 mile non-commercial warranty may be purchased for an additional $190. If you just want more information and haven't been able to find it elsewhere on the site, please fill in the appropriate boxes below and hit the "submit" button at the bottom of the page. We're very Libertarian especially when it comes to privacy so rest assured that your info won't be sold or traded.  If you are ready to bite the bullet and order a longblock engine fill out the additional payment and delivery  sections farther on down.

If you aren't sure about what you have, leave it blank. If we really need to know we'll call or e-mail

T. B. Injection

Tuned Port or Sefi

Carburetor

Auto Trans

Manual Trans

Year

4 wheel drive

Model of the Vehicle


Try to avoid having the engine delivered to a residential address if possible. Roadway, for example adds $40!


Deliver the

Engine To:

Residential or

State/Province

Name

Zip/Postal Code

Business Address

Country

E-mail address

Contact Person

Phone

City

From the chart above add Core deposit

Illinois only 7% Surcharge incl EPA and sales tax

From the chart above Shipping:

From the chart above US dollars Longblock Price

From the chart above, type your part number here

Since we're better engine builders than web site designers you'll need to do the math yourself and put the Total Up front payment here

State/Province

Name

Zip/Postal Code

Country

E-mail address

Address

Phone

City

Method of Payment

remanufactured.com 1.800.575.6998

 

Remanufactured.com Intro  Bare Engine Blocks & Cylinder Head Cores  Engine Diagnosis  Engine FAQs  Engine Installation  YOUR Engine Remanufactured   Core Deposit & Warranty  Engine Swaps & Performance Upgrades  Shipping  
This remanufactured engine site has engine swaps, performance engine upgrades and general information at links above.   Remanufactured engine pricing and I.D. for cars, inboard boats, trucks, RV's or motor home at links below. 1400 different remanufactured engines and we fill orders on 90% of them.  Short block re-manufactured engines are usually 1/4 less with core deposits at 2/3 of a long block remanufactured engine. Call for turn key crate engines too.
 AMC Jeep | BMW | Buick | Cadillac | Chevrolet 4 Cylinder | Chevrolet 6 Cylinder | Chevrolet Smallblock V8 | Chevrolet 6.5 Diesel| Chevrolet Bigblock V8  | Chrysler Dodge Plymouth | Ford 4 Cylinder | Ford 6 Cylinder | Ford 8 Cylinder | Geo | Honda | Infinity | Isuzu | International Harvester | Lexus | Mazda | Mitsubishi | Mercedes | Nissan | Oldsmobile | Pontiac | Suzuki | Toyota | Volvo
Eves & Weekends 1-800-575-6998

 


 Classic Pontiac engines  

 

Inboard Marine Engines

Garage Sale

RV& Motorhome engines

Quality NEW and Remanufactured Inboard Marine Engines From Remanufactured.com 

For Chevrolet, Ford, Indmar, Mercruiser, Mercury Marine, Crusader, Sea Maxx, GMC, Berkeley, Volvo Penta, OMC, Master Craft, and others. Engines below will be listed as Chevrolet, for example, even if they were originally installed as Volvo.

Call 1.800.575.6998 Overseas call 1-443-451-5139
4 cylinder marine
longblock engines		 6 cylinder marine
longblock engines		 8 cylinder marine
longblock engines		 Marine Manifolds
and other parts.
       

 

 
Very loooooong page. Turnkeys and V8s at the bottom.  Keep scrolling down ~under construction
Make Liters CC or CID Cyl VIN Eng Code Years Description marine engines  Part Number Long Block Price$ Core Dep$ Round Trip Ship
Volvo Penta 1.8L    - 4   -  Marine 61-68 Aq 90, AQ 95, AQ 95A, AQ100, AQ110, AQ120 Block# B18 OHV Call for availability   $1,990 $700 $195*
Volvo Penta 2.0L    - 4   -  Marine 68-77 AQ105A, AQ115A, AQ115B, AQ115C, AQ130A, AQ130B, AQ130C, AQ130D Block# B20 OHV Call for availability   $1,990 $700 $195*
                       
'FORD 2   - 4   -  Marine 75-90 SOHC iron head w' round ports Ford 122, Mercruiser, Mercury Marine, OMC others    - $1,390 $300 $195*
Volvo Penta 2.1L    - 4   -  Marine 77-84 AQ120B-110HP, AQ125A- 117HP , AQ140A-125HP,80MM stroke 8v 1000160 head "A" cam, Block# B21 SOHC
 		   $1,990 $500 $195*
FORD 2.3 140 4   - Marine 78-91 Ford'140, OHC Mercruiser, OMC, others D shaped ports Usually from 1985 -1991     - $1,490 $400 $195*
VOLVO Penta 2.3   4  - Marine       84-93    AQ125B, 'AQ131A, Aq131B, AQ131C, AQ131D, AQ145A, AQ145B, AQ151B, AQ151C, AQ171A, AQ171C, AQ230A, AQ250A, AQ251A = 2.3L (80MM stroke) 8v with 1000531 head and "A" cam B-23 B230F SOHC 977M $1,990 $500 $195*
                       
VOLVO Penta 2.5   4  - Marine      86-87   Volvo Penta Aluminum head AQ151 = 2.5L (86MM stroke) 8v with 1000531 head and "A" cam forged steel crankshaft block has piston squirters. Don't get your hopes up. Custom pistons must be made, Abba songs must be listened to.. 977M $2,290 $1000 $195*
VOLVO Penta 2.5   4   Marine      86-89 AQ171A, AQ171C = 2.5L (AQ151/B230 type, not B234F design) 16V DOHC Custom pistons, etc. min. 6 weeks to do yours. Learn flycasting from the dock while you wait   $3,490 $1,500 $195*
CHEVY  2.5 153 4   - Marine 62-86 GM, Mercruiser, OMC others
block#3915983, 3833045, 833035,
3849449, 3788514 Siamesed port head#3824433, 3805888, 3864888, 3788519 (904, 748, 900, 758, 087, 852 and 531) Crank#3788522, 3793082, 5743014 120 Horsepower		 153M $1,490 $500 $195*
CHEVY  2.5 153 4   - Marine 62-86 GM, Mercruiser, OMC others
block#3915983, 3833045, 833035,
3849449, 3788514 Head#2778964 tall port 1 3/4" tall Crank#3788522, 3793082, 5743014 Uncommon.  Uses the same tall port head as the 181A 125 Horsepower		 153F $1,490 $500 $195*
CHEVY 3 181 4   - Marine 75-89 181, GM, OMC Mercruiser, others Two piece rear seal Block#2770087, 886 Siamesed port head#3824433, 3805888, 3864888, 3788519 (904, 748, 900, 758, 087, 852 and 531) Crank#N-393775 Starter bolt holes straight across. 135-140 HP.Also used in industrial applications also where propane is the primary fuel. When out of stock, use a 153M 181F $1,590 $700 $195*
CHEVY 3 181 4   - Marine 75-89 181, GM, OMC, Volvo Penta, Mercruiser, others Two piece rear seal Block#2770087, 886 Head#2778964 tall port 1 3/4" tall Crank#N-393775 Starter bolt holes straight across. 140HP When out of stock, use a 153F 181A $1,590 $700 $195*
CHEVY 3 181 4   - Marine 90-97 181, GM, OMC Mercruiser, others One piece rear seal Block#14097080 MEX Head#2176904, 277087, 2774531, 2776852, 2776904, 3937758, 2777770, 2778964, 14098820 1.360" tall squatty ports, wide journal crank#140968, N393775, 3941352. Takes wide powdered connecting rods. diagonal starter bolt holes, for applications with 168 tooth flywheel. 135-140HP Socket in rear of crankshaft 181B $1,590 $500 $195*
CHEVY 3 181 4   - Marine 95-2010 MCM 3.0LX-181 CID(1990-1997)& MCM 3.0L(1998&UP) for applications with 168 tooth flywheel. diagonal starter bolt holes
Narrow rod journal crank 93436083 w' flat rear hub Mercruiser, OMC, etc., but maybe not all Volvo Penta 3.0. Specify if your coupler fits snugly in a socket in the back of the crank hub.		 181C $1,590 $500 $195*
Volvo Penta 3 3.0L 6   Marine 69-78 AQ170 A, AQ 170B, AQ170C   $2,390 $500 $195
Buick 3.7 225 6   Marine 1960's-@1972 Grays Marine others, distributor in the front   $1,490 $400 $195*
Mercruiser 3.7 224 4   - Marine any 228 470 Serial number required for ordering      - $1,990 $700 $195*

6 cylinder inboard marine engines 

Make Liters CC or CID Cyl VIN Eng Code Years Description  Part Number Long Block Price$ Core Dep$ Round Trip Ship
Volvo Penta 3 3.0L 6   Marine 69-78 AQ170 A, AQ 170B, AQ170C   $2,390 $500 $195
Buick 3.7 225 6   Marine 1960's-@1972 Grays Marine others, distributor in the front   $1,490 $400 $195*
CHEVY 3.8 229  V6   - Marine 80-86 229, GM,OMC,others, distributor in the back. Extreme front of engine has two threaded bolt holes down low above the oil pan on the starboard side, but only the top one on the port side     - $1,490 $300 $195*
Buick 3.8 231 V6   Marine 72-77 Oddfire Buick, distributor in the front. the distributor cap terminals are staggered in three pairs of two   $1,390 $400 $195*
Buick 3.8 231 V6   Marine 77-81 Even fire Buick, distributor in the front. The distributor cap terminals are evenly spaced   $1,390 $400 $195*
CHEVY 4.1 250 6   Marine any Straight 6 Chevrolet 165HP     - $1,390 $300 $195*
CHEVY 4.3 262 V6   Marine 1985 Non balance shaft engine, non-roller cam. Specify if fuel pump mounts on block Block#14071177, head 1479248, 1479268, crank #1174  two piece rear seal, reverse rotation add $300   $1,390 $300 $195*
CHEVY 4.3 262 V6   Marine 1986 Non balance shaft engine, non-roller cam, 1 piece rear seal, Block #14088553,  head 1479248, 1479268 mechanical fuel pump mounts on block,  reverse rotation add $300   $1,390 $300 $195*
CHEVY 4.3 262 V6   Marine 87-91 Non balance shaft engine, roller cam Block#10066011, 14093683, Head# 14094768, 10144103, Specify if mechanical fuel pump on block,  reverse rotation add $300   $1,590 $300 $195*
CHEVY 4.3 262 V6   Marine 88-91 Non balance shaft engine, roller cam, 2 bolt lifter retainer in valley, Block# 10105867, Head#14094768, 10144103, 14099067, 12553050, 10144115, Cylinder head has wide intake face and one sending unit hole. Specify EFI or carb, specify if fuel pump mounts on block,  reverse rotation add $300   $1,590 $300 $195*
CHEVY 4.3 262 V6   Marine 88-91 Non balance shaft engine, roller cam, 2 bolt lifter retainer in valley, Block# 10105867, Head#10077626,14099064,10240209, 10238181, Cylinder head has eyebrow intake ports and 2 sending unit holes, Specify EFI or carb, specify if fuel pump mounts on block,  reverse rotation add $300   $1,590 $300 $195*
CHEVY 4.3 262 V6   Marine 92-95 Metric Vortec W/Roller Cam & balance shaft, specify number of timing cover bolts,  reverse rotation add $300   $1,690 $500 $195*
CHEVY 4.3 262 V6   Marine 92-95 Metric Vortec W/Roller Cam & w/o balance shaft, specify number of timing cover bolts,  reverse rotation add $300   $1,590 $500 $195*
CHEVY 4.3 262 V6   Marine 96-98 Vortec W/Roller Cam & balance shaft 14099099, specify number of timing cover bolts   $1,790 $500 $195*
CHEVY 4.3 262 V6   Marine 99-02 Metric Vortec W/Roller Cam & balance shaft 14099099-M specify number of timing cover bolts   $1,790 $500 $195*
CHEVY 4.3 262 V6   Marine 03-07 Metric Vortec W/Roller Cam & balance shaft, specify number of timing cover bolts   $2,390 $500 $195*
CHEVY   292 6   Marine any Straight 6 Chevy --> as of summer 2010 marine 292 cams are no longer being made, 250 I-6 cams cannot be used. We must regrind yours or use a truck camshaft     - $1,390 $400 $195*
Make Liters CC or CID Cyl VIN Eng Code Years Description  Part Number Long Block Price$ Core Dep$ Round Trip Ship

8 cylinder inboard marine engines 

Make Liters CC or CID Cyl VIN Eng Code Years Description  Part Number Long Block Price$ Core Dep$ Round Trip Ship
FORD 4.4 272 V8   Marine any Ford V8     - $1,990 $600 $195*
FORD 5 302 V8   Marine any Ford V8 flat tappet  lifters     - $1,490 $300 $195*
FORD 5 302 HO V8   Marine any Ford V8 with HO package, includes roller cam, dbl chain    - $1,790 $300 $195*
CHE    5 283 V8   Marine any Powerpack heads add $150   $1,390 $250 $195*
CHE    5 305 V8   Marine 76-85 Chevrolet V8    - $1,390 $200 $195*
CHE    5 305 V8   Marine 76-85 20% more power Hypereutetic pistons, dbl chain,  upgrade flat tappet cam. About the same power as a 350 Specify efi or carb      - $1,590 $200 $195*
CHE    5 305 V8   Marine 86-90 Chevrolet V8 Specify efi or carb reverse rotation add $200      - $1,390 $300 $195*
CHE    5 305 HO V8   Marine 86-90 20% more power Hypereutetic pistons, dbl chain,  upgrade flat tappet cam. About the same power as a 350 with better fuel economy Specify efi or carb     - $1,690 $300 $195*
CHE    5 305 V8   Marine 91-95 Chevrolet V8 Specify efi or carb   $1,590 $300 $195*
CHE    5 305 V8   Marine 96-03 Chevrolet V8 Specify efi or carb 12 bolts hold the       - $1,890 $400 $195*
CHE    5 305 V8   Marine 96-03 Vortec Chevrolet V8 Specify efi or carb 8 bolts hold the intake on      - $2,090 $500 $195*
  5 307 V8   Marine 68-75 Chevrolet V8 Crusader Mercruiser, others    - $1,290 $100 $195*
Chrysler   318 V8   Marine up to 90 Chrysler     - $1,490 $300 $195*
CHE      327 V8   Marine 62-69 Chevrolet 210 horse power     - $1,490 $300 $195*
CHE      327 V8   Marine Perf 62-69 Chevrolet 300 HP Steel crank Fuelie heads ck availability     - $1,890 $600 $195*
Chrysler   340 V8   Marine 69-72 Specify steel or cast crank check availability   $1,490 $900 $195*
OLD     5.7 350 V8   Diesel Marine  77-80      Olds diesel marine 120hp Diesel $2,390 $300 $265*
CHE    5.7 350 V8   Marine  68-85 260 HP Chevrolet 4 valve cover screws on the perimeter 2 piece rear seal, specify left or right dipstick     - $1,390 $300 $195*
CHE    5.7 350 V8   Marine 69-85  290 HP Chevrolet HO flat top pistons dbl chain Speed Pro cam Replaces 265, 283, 305, 307, 327, 350, and 400 smallblock engines. call for details  2 piece rear seal, specify left or right dipstick     - $1,580 $300 $195*
CHE    5.7 350 V8   Marine 69-85 330 HP Chevrolet HO flat top pistons dbl chain high performance cam, lightning cylinder heads, hardened pushrods, etc. Replaces 265, 283, 305, 307, 327, 350, and 400 smallblock engines.      - $2,390 $300 $195*
CHE    6.2 350/383 V8   Marine 69-85 325 HP Stroker Chevrolet HO flat top pistons dbl chain high performance cam, steel crank, hardened pushrods, etc. Replaces 6.2 marine engines.      - $2,490 $300 $195*
CHE    6.2 350/383 V8   Marine 69-85 370 HP Stroker Chevrolet HO forged flat top pistons dbl chain Speed Pro cam, Eagle forged con rods, Eagle steel crank, performance cylinder heads, hardened pushrods, etc. Replaces 283, 305, 307, 327, 350, and 400 smallblock engines.      - $3,590 $300 $195*
CHE    5.7 350 V8   Marine 86 260hp Chevrolet  4 valve cover screws on the perimeter 1 piece rear seal crankshaft      - $1,390 $400 $195*
CHE    5.7 350 V8   Marine 86 290 HP Chevrolet HO flat top pistons dbl chain Speed Pro cam 1 piece rear seal, heads 4 valve cover screws on the perimeter     - $1,680 $400 $195*
CHE    5.7 350 V8   Marine 86 350 HP Chevrolet HO flat top pistons dbl chain high performance cam, lightning cylinder heads, hardened pushrods, etc. 1 piece rear seal, heads 4 valve cover screws on the perimeter     - $2,390 $400 $195*
CHE    5.7 350/383 V8   Marine 86 325 HP Stroker Chevrolet HO flat top pistons dbl chain high performance cam, steel crank, hardened pushrods, etc. Replaces 6.2 marine engines.  1 piece rear seal, heads 4 valve cover screws on the perimeter     - $2,490 $400 $195*
CHE    5.7 350/383 V8   Marine 86 380 HP Stroker Chevrolet HO forged flat top pistons dbl chain Speed Pro cam, Eagle forged con rods, Eagle steel crank, performance cylinder heads, hardened pushrods, etc. 1 piece rear seal, heads 4 valve cover screws on the perimeter      - $3,590 $400 $195*
CHE    5.7 350 V8   Marine 87-95 270hp Chevrolet valve cover screws thru center 1 piece rear seal crankshaft specify mechanical fuel pump     - $1,490 $400 $195*
CHE    5.7 350 V8   Marine 87-95 300 HP Chevrolet HO flat top pistons dbl chain Speed Pro cam 1 piece rear seal,  valve cover screws thru center, specify mechanical fuel pump     - $1,780 $400 $195*
CHE    5.7 350 V8   Marine 87-95 350 HP Chevrolet HO flat top pistons dbl chain high performance cam, lightning cylinder heads, hardened pushrods, etc. 1 piece rear seal, heads valve cover screws thru center, specify mechanical fuel pump, 4 bolt mains      - $2,490 $500 $195*
CHE    5.7 383 V8   Marine 87-95 325 HP Stroker Chevrolet HO flat top pistons dbl chain high performance cam, steel crank, hardened pushrods, etc. Replaces 6.2 marine engines.1 piece rear seal,  valve cover screws thru center, specify mechanical fuel pump, 4 bolt mains Can replace a 350 5.7L engine     - $2,890 $500 $195*
CHE    5.7 383 V8   Marine 87-95 380 HP Stroker Chevrolet HO forged flat top pistons dbl chain Speed Pro cam, Eagle forged con rods, Eagle steel crank, performance cylinder heads, hardened pushrods, etc. 1 piece rear seal, valve cover screws thru center, specify mechanical fuel pump, 4 bolt mains Can replace a 350 5.7L engine     - $3,590 $500 $195*
CHE    5.7 350 V8   Marine 92-97 Mastercraft LT-1 only block#10125327 specify iron head#10125320, 12554290 OR aluminum heads#10128374, 10128649 OR 10239902, 1255560   $2,490 $700 $195*
CHE    5.7 350 V8   Marine 97-04 280 hp 'Chevrolet  12 bolts hold the intake on      - $1,990 $425 $195*
CHE    5.7 350 V8   Marine 97-04 320 hp Chevrolet Vortec heads 8 bolts hold the intake on     - $2,290 $600 $195*
CHE    5.7 350 V8   Marine 97-04 Chevrolet 350 hp Vortec aftermarket heads  8 bolts hold the intake on flat top pistons dbl chain high performance cam, hardened pushrods, etc. 1 piece rear seal, heads valve cover screws thru center, specify mechanical fuel pump, 4 bolt mains      - $2,890 $600 $195*
CHE    5.7 383 V8   Marine 97-04 Chevrolet 340 hp Vortec heads  8 bolts hold the intake on  forged flat top pistons dbl chain Speed Pro cam, Eagle forged con rods, Eagle steel crank, performance cylinder heads, hardened pushrods, etc. 1 piece rear seal, valve cover screws thru center, specify mechanical fuel pump, 4 bolt mains Can replace a 350 5.7L engine     - $2,590 $600 $195*
CHE    5.7 383 V8   Marine 97-04 Chevrolet 380 hp Aluminum performance Vortec heads  8 bolts hold the intake on forged flat top pistons dbl roller chain Comp Cams roller cam, Eagle forged con rods, Eagle steel crank, hardened pushrods, etc. 1 piece rear seal, valve cover screws thru center, specify mechanical fuel pump, 4 bolt mains Can replace a 350 5.7L engine     - $3,790 $600 $195*
FORD 5.8 351 V8   Marine 69-86 Ford V8 Dipstick in pan 233hp- 250 hp     - $1,490 $300 $195*
FORD 5.8 351 V8   Marine 87-91 Mercury, Mercruiser, Ford V8 Dipstick in block 233hp- 250 hp     - $1,490 $500 $195*
Chrysler   360 V8   Marine up to 90 Chrysler     - $1,490 $300 $195*
CHE    6.6 396, 402 V8   Marine 66-74 Big block Chevy 2 piece rear seal Mark 4 ~Roller rockers & pushrods  add $350~ Steel crankshaft add $200~ 365HP hydraulic cam and lifter kit add $200  Roller cam, roller lifters, etc. add $900. Brand new rectangular port heads add $900 Reverse rotation ad      - $1,890 $600 $265*
Oldsmobile 7.4 403 V8   Marine 77-81 Berkley Packajet, etc.      - $1,690 $500 $265*
CHE      427 V8   Marine up to 1990 Big block Chevy 2 piece rear seal Mark 4 ~Roller rockers & pushrods  add $350~ Steel crankshaft add $400~ 365HP hydraulic cam and lifter kit add $200  Roller cam, roller lifters, etc. add $900. Brand new rectangular port heads add $900 Reverse rotation ad      - $1,890 $900 $265*
CHRYSL  7.2 440 V8   Marine  66-72      Specify steel or cast iron crank Reverse rotation only available if your cam is regrindable add $300   $2,090 $800 $265*
CHRYSL  7.2 440 V8  - Marine  73-84      Specify steel or cast iron crank Reverse rotation only available if your cam is regrindable add $300    $2,090 $800 $265*
CHE    7.4 454 V8