1. remanufactured.com INTRO | 2. Map to the Shop | 3. Bare Engine Blocks & Cylinder Head Cores | 4. Engine Noise Diagnosis 101  | 7. Engine Installation Information | 8. Custom Remanufacture of YOUR Engine | 9. Core Deposit, Warranty, Policies | 10. Cylinder Heads  | 13. Shipping

Remanufactured engine links of a general  nature are above.  Remanufactured engine links below are for your specific application

| Marine Engines | RV and Motorhome Engines |

 Acura Engines | AMC Jeep Engines | BMW Engines | Buick V-6 Engines | Buick V-8 Engines | Cadillac Engines | Chevrolet 4 Cyl Engines | Chevrolet 6 CYL Engines | Chevrolet smallblock 8 Cyl Engines  | Chevrolet BIGBLOCK 8 Cyl Engines | Ford 4 Cyl Engines  | Ford 6 Cyl Engines | Ford 8 Cyl Engines | Geo Engines | Honda Engines | Hyundai Engines | Infinity Engines | International / Navistar | Isuzu Engines | Lexus Engines | Mazda Engines | Chrysler Mitsubishi 4 Cyl Engines  | Chrysler Mitsubishi 6 Cyl Engines | Chrysler Dodge Plymouth 8 Cyl Engines | Mercedes Engines  | Nissan Engines |Oldsmobile Engines | Suzuki Engines | Toyota 4 Cyl Engines | Toyota 6 Cyl Engines

 Remanufactured Engine Inquiry/Order Form Page

remanufactured.com 1.800.575.6998 Eves and Weekends too!  Checks over the phone is fast and convenient/ checks by fax too!

Select your remanufactured engine and enter information into the form below. Then press the submit button at the bottom.

Make  Liters CC or CID Cyl VIN Eng Code  Years  Description  Part Long Block Price$ Core Dep $ Round Trip Ship
Chrysler Dodge Plymouth 1.4  - 4   G12B         79-80      Colt,Champ,Non-Pulse Air,  220 $1,290 $300 $195*
Chrysler Dodge Plymouth 1.4  - 4 J G12B         81-84      Colt,Champ,Non-Pulse Air,FWD, , MCA jet head, without silent shaft  219 $1,290 $300 $195*
Chrysler Dodge Plymouth 1.5  - 4 J G15B         85-89      Mirage, Precis,Colt, Excel, G15B or G4AJ, FWD, MCA Jet head  Carbureted        222 $1,290 $300 $195*
Chrysler Dodge Plymouth 1.5  - 4 A,J 4G15         88-94      Mirage, Colt, Summit, Excel, Scoupe, FWD, non MCA Jet Head, FI 8 valve If carb use 222.  If 12 valve use 223A 223 $1,290 $300 $195*
Chrysler Dodge Plymouth 1.6  - 4   4G32         76-77      Colt,Arrow W/Single Hole    204A  $1,290 $300 $195*
Chrysler Dodge Plymouth 1.6  - 4   4G32         76-77      Colt,Arrow W/1-Hole A.I.R. pump,   204B  $1,290 $300 $195*
Chrysler Dodge Plymouth 1.6  - 4   4G32         76-77      Colt,Arrow,Silent Shaft,1  212 $1,290 $300 $195*
Chrysler Dodge Plymouth 1.6  - 4 K G32B         78-80      Colt,Arrow,Challenger,Sapporo, RWD, MCA, Jet head  203 $1,290 $300 $195*
Chrysler Dodge Plymouth 1.6  - 4   G32B         78-80      Colt,Arrow,Challenger,Sap  207 $1,290 $300 $195*
Chrysler Dodge Plymouth 1.6  - 4 3, A G32B         79-87      Colt,Champ, FWD, MCA jet head, without silent shaft, belt driven cam  218 $1,290 $300 $195*
Chrysler Dodge Plymouth 1.6  - 4 F G32B         84-88      Colt, Champ, MCA Jet head,Fwd, Turbo                  218A  $1,390 $300 $195*
Chrysler Dodge Plymouth 1.6  - 4   4G61         88-91      Colt Wagon, Summit         225 $1,790 $300 $195*
Chrysler Dodge Plymouth 1.6  - 4 Z 4G61        4/ 88-5/89      Mirage Turbo, FWD, DOHC, 16 valve, turbo      245 $1,990 $300 $195*
Chrysler Dodge Plymouth 1.8  - 4   4G37         5/88-94    Talon, Laser, Non-Mca, Fwd 229 $1,390 $300 $195*
Chrysler Dodge Plymouth 1.8 1790 4  - 4G37         89-90      Colt, 4G37, FWD, Non MCA Jet Head, 8 Valve, w/o Balance shaft   229A  $1,390 $300 $195*
Chrysler Dodge Plymouth 1.8 1834 4  - C,D  5/91-96    Expo, Vista 5/91-90, Mirage, Colt, Summit Wagon 6/92-96, 4G93, FWD, SOHC, 16 Valve  247 $1,990 $300 $195*
Chrysler Dodge Plymouth 1.8 1834 4  - C,D  6/94-5/96    Vista Colt 4G93, FWD, SOHC, 16 Valve, Intake On Left Side Of Head, Crank Angle Sensor On Oil Pump, Oil filter, Mounts To Block. 247A $1,990 $300 $195*
Chrysler Dodge Plymouth 2   4 R 4G63      1/88-4/92 Vista, Laser,DOHC,16 valve,6bolt flywheel,non-turbo, also see 228 D, Head part #2265 228A $1,990 $500 $195*
Chrysler Dodge Plymouth 2   4 U 4G63      5/88-4/92 Laser, FWD,DOHC,Turbo,16valve,FWD,6 Bolt flywheel, head pt#2265 228B $1,990 $500 $195*
Chrysler Dodge Plymouth 2   4 V 4G63      88-5/92 ColtVista only,FWD,SOHC,Nonroller rockers, non MCA Jet, 8 Vlave, 52mm water pump flange,call for head pt #call 228G $1,990 $300 $195*
Chrysler Dodge Plymouth 2   4 R,E 4G63 5/92-93 Laser,Talon,DOHC,16 valve, 7 bolt flywheel,non-turbo head part #2265 228D $1,990 $500 $195*
Chrysler Dodge Plymouth 2   4 F 4G63 5/92-12/93 Laserr, Talon,DOHC,16 valve,7 bolt flywheel,turbo, without cam and crank position sensor,head paart #2265 228E $1,990 $300 $195*
Chrysler Dodge Plymouth 2   4 F 4G63 1/94-4/90 Laser, Talo,DOHC,16 vvalve, 7 bolt flywheel, turbo,cam and crankpositioon sensorsbaffle plate,head part #call 228F $2,190 $800 $195*
Chrysler Dodge Plymouth 2   4 v 4G63 91-92 Colt Vista only, FWD,SOHC,Roller Rockers, NonMCA Jet, 8 Valve, 52mm water pump flange head part#2228 228H $2,190 $300 $195*
Chrysler Dodge Plymouth 2   4 F 4G63 4/90-6/96 Laser, Talon, DOHC, 16 valve, 7 bolt flywheel, turbo cam and crank position sensors,baffle plate mounts to main caps with 8mm bolts head part # call 228M $2,190 $800 $195*
Chrysler Dodge Plymouth 2   4 F   7/96-99 Laser, Talon, Turbo,DOHC,16 valve, 7 bolt flywheel, cam sensor on rrear of head(intake side)crank sensor mounts to oil pump  Head part # call 228J $2,190 $800 $195*
Chrysler Dodge Plymouth 2  - 4 D G63B         5/83-4/84  Max, Montero, D-50, RWD, MCA Jet head   224A  $1,190 $300 $195*
Chrysler Dodge Plymouth 2  - 4 D G63B         5/83-4/84  Cordia, Tredia, FWD, Crank sprocket 79mm  224B  $1,190 $300 $195*
Chrysler Dodge Plymouth 2   4 V G63B 87-88 Vista, SOHC,MCA Jet head,FWD,Fl,hydraulic lifter,121/4"bellhousing,79mm crank sprocket,head part #2244 234C $1,790 $300 $195*
Chrysler Dodge Plymouth 2   4 D G63B   5/87-6/89 D50 Pickup,RWD,Carb,Std TRANS,Hydraulic Lifter,SOHC,121/4"bellhousing,79mmCrank Sprocket,Head Pt# 2234 234D  $1,790 $300 $195*
Chrysler Dodge Plymouth 2   4 D G63B 5/87-8/89 Vista, FWD,SOHC,hydraulic lifrter,121/4"bellhousing,79mm crank sprocket,big oil pump,2234 234E $1,790 $300 $195*
Chrysler Dodge Plymouth 2  - 4 D G63B         5/84-4/87  Cordia, Tredia, Vista, Sonata, FWD, MCA Jet Head, 5/84-89 Cordia, Tredia, Vista, Carbureted 12 1/4" bellhousing bolts, if FI see 234C or 228 Head Part #2234  234B  $1,290 $300 $195*
Chrysler Dodge Plymouth 2   4 D G63B        5/87-5/89 D-50 Pickup,RWD,Auto trans,hydraulic lifter, 131/4' across lower bellhousing bolts,big oil pump,Head part# 2234 244B $1,590 $400 $195*
Chrysler Dodge Plymouth 2  - 4 D G63B         5/84-4/87    Max Pickup, Montero, D-50, RWD, MCA Jet Head, 12 1/4" across bellhousingbolts, 79 mm crank sprocket, carbureted 5-84/5-86 stick or auto, also 5/86-4/87 standard transmission,RWD,Head pt# 2234   234A  $1,290 $300 $195*
Chrysler Dodge Plymouth 2  - 4 D G63B         5/86-4/87  Max Pickup, D-50, RWD Automatic transmission, hydraulic lifter, 12 1/4" across lower bellhousing bolts  244A  $1,290 $300 $195*
Chrysler Dodge Plymouth 2  - 4 U G52B         78-83    Colt, Arrow, D-50, RWD, MCA Jet Head.  With silent shaft, Standard transmission, 28mm CS pilot  209A  $1,290 $300 $195*
Chrysler Dodge Plymouth 2  - 4 U G52B         78-83    Colt,Arrow,D-50,RWD, MCA Jet Head, with silent shaft, Standard or Automatic transmission, 41mm CS pilot   209B  $1,290 $300 $195*
Chrysler Dodge Plymouth 2  - 4 D G63B        6/ 82-4/83  Max Pickup, D-50, RWD, MCA Jet Head  214A  $1,290 $300 $195*
Chrysler Dodge Plymouth 2  - 4 U 4G63       88-4/92    Eclipse, Talon, Laser, FWD, DOHC, Turbo, 16 valve, FWD, 6 Bolt flywheel  228B  $2,190 $400 $195*
Chrysler Dodge Plymouth 2  - 4 V 4G63       1/885/-92     Galant only, FWD, SOHC, Roller Rockers, Non MCA Jet, 8 valve, 58mm water pump flange  228 $1,690 $400 $195*
Chrysler Dodge Plymouth 2  - 4 R 4G63       88-4/92      Galant, Eclipse, Vista, Laser, Sonata, DOHC, 16 valve, 6 Bolt flywheel, Non Turbo.  Also see 228D     228A  $2,190 $400 $195*
Chrysler Dodge Plymouth 2 122 4 C  - 95 Neon, Stratus, FWD, MFl, SOHC, 16 valve, upper block #642,651,  Lower block#769, head #737,crank #755,2 vent tubes on left side of block, valve cover has a 7- 6mm  bolts and 3- 8mm bolts, with water pump  head part# 2D75  DD75  $1,790 $400 $195*
Chrysler Dodge Plymouth 2 122 4 Y  -  95-99      Neon only, FWD, DOHC, 16 valve upper block #642, lower#769,, head #086,intake on radiator side, head part #2D84 Not for Talon, Avenger or Sebring. (see DD84)  DD73  $1,990 $400 $195*
Chrysler Dodge Plymouth 2 122 4 Y  - 95-99  Avenger, SebringCoupe 2000 Neon, FWD,MFl, DOHC, 16 valve.  Upper block #642, lower #769, head #4667867J3F,crank#755,intake on firewall  side,head part# 2D84   DD84  $1,990 $400 $195*
Chrysler Dodge Plymouth 2 122 4 C   96-99 Neon, Stratus,  Breeze,FWD,SOHC,MFl, 16 valve,Upperblock#642,651,lower block#769,head#737,crank#755,no vent tubes on the left side of block, valve cover has 10-6mm bolts, with water pump  head part #2D87 DD87 $1,890 $400 $195*
Chrysler Dodge Plymouth 2 122 4 C   00-01 Neon, Stratus, Breeze,FWD,SOHC,MFl,16 Valve,upper blk #642,651,lower blk #769,head #737,crank #755,valve cover has 10-6mm bolts, extra 8mm bolt under #2 &#3 intake port,with water pump Head part # call DD91 $1,990 $400 $195*
Chrysler Dodge Plymouth 2.2 135 4 C,D,B,8  -  81-85      FWD, Non Turbo, 6 bolt flywheel, 1 AC boss on head, 2 on block for AC bracket. Head part# 2D13  DD13  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 C  -  83-85      FWD, carbureted or Fuel Injected, 6 bolt flywheel, 2 AC bosses on head, 3 on block for AC bracket  Head part #2D34  DD35  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 E  -  84-85      FWD,Turbo, 6-Bolt Flywheel , head part # 2D55     DD55  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 C  -  86-87      8 Bolt Flywheel, FWD, Carb, for FI use DD36, for 1998 see DD37   DD33  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 D  -  86-87      FWD,  FI, 8 bolt flywheel, can use DD33, for 1988 see DD37    DD36  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 E  -  86-87       FWD Turbo, Non-Roller Cam, 8 bolt flywheel   DD42  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 C  -  86-87      RWD, Dakota, Non Roller 8 bolt flywheel   DD45  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 D  - 88 FWD, FI,  Roller Cam, 8 bolt flywheel  DD37  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 E  - 88 FWD, Turbo II, Roller cam   DD43  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 C  - 1988 RWD, Dakota, Roller cam, 8 bolt flywheel   DD46  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 A  - 1989 Turbo II, Roller Cam, Fwd   DD54  $1,490 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 D  -  89-92      FWD, Roller cam, EFI, Block# 730, 030, 1.003" crank nose OD  DD49  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 A  -  90-92      FWD, Turbo IV, Roller cam, with balance shaft. This is NOT the DOHC engine in Spirit R/T!  DD52  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.2 135 4 C  -  91-92      FWD, Turbo, DOHC, 16 valve, block# 730, head #450 R&R only          DD80  $2,190 $1,200 $195*
Chrysler Dodge Plymouth 2.2 135 4 D  -  93-95      FWD, Roller cam, EFI, block #730, 030, Block has extra cooling passages            DD60  $1,190 $300 $195*
Chrysler Dodge Plymouth 2.4 148 4 X,B  -  90-6/96      FWD, DOHC, MFI, 16 valve Neon, Sebring, Convertible, Stratus, Cirrus, Voyager, Upper block#443, lower block#445, Caravan, head#086, crank#916 hydraulic belt tensioner     DD74  $2,290 $300 $195*
Chrysler Dodge Plymouth 2.4 148 4 X,B  -  6/96-97     FWD, DOHC, MFI, 16 valve Neon, Sebring, Convertible, Stratus, Cirrus, Voyager, Upper block#443, lower block#445, Caravan, head#086, crank#916 spring belt tensioner  DD88  $2,290 $300 $195*
Chrysler Dodge Plymouth 2.4 148 4 X,B  -  98-00    FWD, DOHC, MFI, 16 valve Neon, Sebring, Convertible, Stratus, Cirrus, Voyager, Upper block#443, lower block#445, Caravan, head#086, crank#916 spring belt tensioner  DD90  $2,390 $300 $195*
Chrysler Dodge Plymouth 2.5 153 4 K  -  86-87      Non-Roller Cam, With Balance shaft, FWD, 4bolt crank gear  DD34  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.5 153 4 K  - 88 FWD,Non-turbo, Roller Cam,5 bolt crank gear, tall deck block With Balance  Shaft  DD39  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.5 153 4 J  -  89-91      Turbo, Efi, Roller Cam, Short deck block  DD53  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.5 153 4 K  -  89-92      Roller Cam, Fwd, Non-turbo, EFI, balance shaft, short deck block            DD47  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.5 153 4 G  -  89-90      RWD, Roller Cam, Short Deck block, Dakota   DD48  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.5 153 4 K  -  93-90      FWD, FI, Roller Cam, Balance Shaft, Short deck, block#4315730, crank nose 1.003" OD Extra cooloing in block head        DD61  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.5 153 V6 N  6G73 6/94-00   V6 Avenger, Sebring, 6g73, SOHC, 24 valve, EGR hole in left head for Chrysler applications. 249 $2,890 $300 $195*
Chrysler Dodge Plymouth 2.5 153 4 P  -  96-00    Dakota, Block #200,059,532,403,Head#403,117,Crank#904, Crank nose2.125"  DD61  $1,290 $300 $195*
Chrysler Dodge Plymouth 2.6  - 4 E G54B         5/84-5/89  Colt, D-50, RWD, MCA Jet Head, Hydraulic Rockers, 12 1/4" across bellhousing bolts, Automatic Transmission 5/86 up use 217B.  Can use 216A    217A  $1,290 $400 $195*
Chrysler Dodge Plymouth 2.6  - 4 E G54B         5/84-5/89    D-50, Montero, RWD, MCA Jet Head, Hydraulic Rockers, 13.25" across bellhousing bolts, Standard Transmission 1/83- 4/86.  Stick 5/86 up Automatic or standard transmissions   217B  $1,390 $400 $195*
Chrysler Dodge Plymouth 2.6  - 4 F,W G54B         78-80      Colt, Challenger, Arrow, Sapporo, D-50, RWD, MCA Jet Head, 12 1/4" across bellhousing bolts, Automatic Transmission ONLY   215A  $1,390 $300 $195*
Chrysler Dodge Plymouth 2.6  - 4   G54B         78-80      Colt,Challanger,Arrow,Sapporo, D-50, RWD, MCA Jet Head, 13 1/4" across lower bellhousing bolts, Standard transmission   215B  $1,390 $300 $195*
Chrysler Dodge Plymouth 2.6  - 4 7 G54B         81-5/84      Colt, Challenger, D-50, Mighty Max, Montero, RWD, MCA Jet Head, 12 1/4" across lower bellhousing bolts.  Automatic Transmission, without pulse air   216A  $1,390 $300 $195*
Chrysler Dodge Plymouth 2.6  - 4 7 G54B         81-5/84      Colt, Challenger, D-50, Mighty Max, Montero, RWD, MCA Jet Head, 13.25" across lower bellhousing bolts, Standard Transmission  216B  $1,390 $400 $195*
Chrysler Dodge Plymouth 2.6  - 4   G54B         81-89      K-Car,Caravan,Voyager,Fwd   216K  $1,390 $400 $195*
Chrysler Dodge Plymouth 2.6  - 4 D,G G54B         81-89       FWD, Caravan, Voyager, K Car, MCA Jet head, with 2 hole pulse air, 12 valve 230 $1,390 $300 $195*
Chrysler Dodge Plymouth 2.6  - 4   G54B         81-89      K-Car, Caravan, Voyager,   231 $1,390 $300 $195*
Chrysler Dodge Plymouth 2.6 2555 4 H,N G54B         2/83-5/85  Conquest Tsi, Starion Turbo, RWD, MCA Jet Head, Turbo, Adjustable Rocker. For hydraulic use 221A.  Oil Pick Up bolts to oil pump    221B  $1,790 $300 $195*
Chrysler Dodge Plymouth 2.6 2555 4 7 G54B         6/81-1/83  Conquest Tsi, Starion Turbo, RWD, MCA Jet Head, Turbo,. Adjustable Rocker. For hydraulic use 221A.  Oil Pick Up bolts to block   221 $1,790 $300 $195*
Chrysler Dodge Plymouth 2.6 2555 4 H,N G54B         6/85-5/89  Conquest Tsi, Starion Turbo, RWD, MCA Jet Head, Turbo.  Hydraulic Rocker, Oil Pump Pick Up mounts to oil pump  221A  $1,790 $500 $195*
Chrysler Dodge Plymouth Liters CC or CID Cyl VIN Eng Code Years Description  Part Number Long Block Price$ Core Dep$ Round Trip Ship

 

--READ ME-- *WA, OR, CA, NV, ID, MT, WY, UT, AZ add $90 to the round trip shipping price above. Outside the 48 states ? Email for a shipping quote to over 100 countries. Our longblock engines come with 1 yr/unlimited mileage warranties standard. A 3 yr/50,000 mile non-commercial warranty may be purchased for engines priced under $2000 at an additional $190. If you just want more information and haven't been able to find it elsewhere on the site, please fill in the appropriate boxes below and hit the "send" button at the bottom of the page. We're very Libertarian when it comes to privacy so rest assured that your info won't be sold or traded.  If you are ready to  order a longblock engine fill out the additional payment and delivery sections farther on down.

Part # from above

CUSTOMER AND VEHICLE

Name

RWD FWD 4WD

T.B. InjTPort or SEFI Carb

Address

Auto Trans Standard Trans 

City State

Year   Model

Zip Phone

VIN if poss.

E-mail

  From the chart above in US dollars longblock price
From the chart above add core deposit
Illinois only 7% surcharge includes EPA and sales tax
From the chart above- shipping

We're better engine builders than site designers so add and put the total here   --Total   

PAYMENT OPTIONS

Money Order / Cashier's Check   Send to: remanufactured.com 14401 South Archer Ave. Lockport Illinois 60441 Attn: Andie   Include a copy of this filled out form.                (Call UPS at 1-800-742-5877 until 7 p.m. Press "O" for a next or second day air letter pickup)

Direct, your bank to our bank wire transfer for same day payment. Call or e-mail us for routing information. 

   
We accept Checks by Phone Place your engine order and pay for it immediately by reading the information to us from your checkbook at 1.800.575.6998

Residential Delivery (Try to avoid as there may be extra charges)

DELIVER TO:

Contact

Business 

Phone

Address

Fax

City

E-Mail

State Zip Code

We ship remanufactured engines to Alabama, Alberta, Arizona, Arkansas, British Colombia, California, Colorado, Connecticut, Delaware, Florida, Georgia, Guam, Hawaii, Idaho, Iowa, Kansas, Kentucky, Louisiana, Maine, Manitoba, Maryland, Massachusetts, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Ontario, Oregon, Pennsylvania, Quebec, Rhode Island, Saskatchewan, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West, Virginia and Wyoming. 1998 1997  1996  1995  1994  1993  1992  1991  1990  1989  1988  1987  1986  1985  1984  1983  1982  1981  1980  1979  1978  1977  1976  1975  1974  1973  1972  1971  1970  1969  1968  1967  1966  1965  1964  1963  1962  1961  1960  1959  1958  © Copyright 1997-2001 remanufactured.com Inc. All Rights Reserved remanufactured.com 14401 South Archer Ave. Lockport Illinois 60441 USA Phone: 1.800.575.6998 Fax:1.815.838.4860 Email: engines@remanufactured.com or citizen@msn.com  http://remanufactured.com

We rebuild and stock rebuilt and remanufactured 4 cylinder engines, V6 engines and V8 engines for ...... the years 2000, 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, 1988, 1987, 1986,  1985, 1984, 1983, 1982, 1981, 1980, 1979, 1978, 1977, 1976, 1975, 1974, 1973, 1972, 1971, 1970, 1969, 1968, 1967, 1966, 1965, 1964, 1963, 1962, 1961 and 1960. 

We ship remanufactured engines to Alabama, Alberta, Arizona, Arkansas, British Colombia, California, Colorado, Connecticut, Delaware, Florida, Georgia, Idaho, Iowa, Kansas, Kentucky, Louisiana, Maine, Manitoba, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Ontario, Oregon, Pennsylvania, Quebec, Rhode Island, Saskatchewan, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West, Virginia and  Wyoming. We are a custom engine rebuilder and supply remanufactured engines for most applications. http://remanufactured-engines.com/

 

Remanufactured.com Intro  Bare Engine Blocks & Cylinder Head Cores  Engine Diagnosis  Engine FAQs  Engine Installation  YOUR Engine Remanufactured   Core Deposit & Warranty  Engine Swaps & Performance Upgrades  Shipping  
This remanufactured engine site has engine swaps, performance engine upgrades and general information at links above.   Remanufactured engine pricing and I.D. for cars, inboard boats, trucks, RV's or motor home at links below. 1400 different remanufactured engines and we fill orders on 90% of them.  Short block re-manufactured engines are usually 1/4 less with core deposits at 2/3 of a long block remanufactured engine. Call for turn key crate engines too.
 AMC Jeep | BMW | Buick | Cadillac | Chevrolet 4 Cylinder | Chevrolet 6 Cylinder | Chevrolet Smallblock V8 | Chevrolet 6.5 Diesel| Chevrolet Bigblock V8  | Chrysler Dodge Plymouth | Ford 4 Cylinder | Ford 6 Cylinder | Ford 8 Cylinder | Geo | Honda | Infinity | Isuzu | International Harvester | Lexus | Mazda | Mitsubishi | Mercedes | Nissan | Oldsmobile | Pontiac | Suzuki | Toyota | Volvo
Eves & Weekends 1-800-575-6998

 


 Classic Pontiac engines  

 

Inboard Marine Engines

Garage Sale

RV& Motorhome engines

Quality NEW and Remanufactured Inboard Marine Engines From Remanufactured.com 

For Chevrolet, Ford, Indmar, Mercruiser, Mercury Marine, Crusader, Sea Maxx, GMC, Berkeley, Volvo Penta, OMC, Master Craft, and others. Engines below will be listed as Chevrolet, for example, even if they were originally installed as Volvo.

Call 1.800.575.6998 Overseas call 1-443-451-5139
4 cylinder marine
longblock engines		 6 cylinder marine
longblock engines		 8 cylinder marine
longblock engines		 Marine Manifolds
and other parts.
       

 

 
Very loooooong page. Turnkeys and V8s at the bottom.  Keep scrolling down ~under construction
Make Liters CC or CID Cyl VIN Eng Code Years Description marine engines  Part Number Long Block Price$ Core Dep$ Round Trip Ship
Volvo Penta 1.8L    - 4   -  Marine 61-68 Aq 90, AQ 95, AQ 95A, AQ100, AQ110, AQ120 Block# B18 OHV Call for availability   $1,990 $700 $195*
Volvo Penta 2.0L    - 4   -  Marine 68-77 AQ105A, AQ115A, AQ115B, AQ115C, AQ130A, AQ130B, AQ130C, AQ130D Block# B20 OHV Call for availability   $1,990 $700 $195*
                       
'FORD 2   - 4   -  Marine 75-90 SOHC iron head w' round ports Ford 122, Mercruiser, Mercury Marine, OMC others    - $1,390 $300 $195*
Volvo Penta 2.1L    - 4   -  Marine 77-84 AQ120B-110HP, AQ125A- 117HP , AQ140A-125HP,80MM stroke 8v 1000160 head "A" cam, Block# B21 SOHC
 		   $1,990 $500 $195*
FORD 2.3 140 4   - Marine 78-91 Ford'140, OHC Mercruiser, OMC, others D shaped ports Usually from 1985 -1991     - $1,490 $400 $195*
VOLVO Penta 2.3   4  - Marine       84-93    AQ125B, 'AQ131A, Aq131B, AQ131C, AQ131D, AQ145A, AQ145B, AQ151B, AQ151C, AQ171A, AQ171C, AQ230A, AQ250A, AQ251A = 2.3L (80MM stroke) 8v with 1000531 head and "A" cam B-23 B230F SOHC 977M $1,990 $500 $195*
                       
VOLVO Penta 2.5   4  - Marine      86-87   Volvo Penta Aluminum head AQ151 = 2.5L (86MM stroke) 8v with 1000531 head and "A" cam forged steel crankshaft block has piston squirters. Don't get your hopes up. Custom pistons must be made, Abba songs must be listened to.. 977M $2,290 $1000 $195*
VOLVO Penta 2.5   4   Marine      86-89 AQ171A, AQ171C = 2.5L (AQ151/B230 type, not B234F design) 16V DOHC Custom pistons, etc. min. 6 weeks to do yours. Learn flycasting from the dock while you wait   $3,490 $1,500 $195*
CHEVY  2.5 153 4   - Marine 62-86 GM, Mercruiser, OMC others
block#3915983, 3833045, 833035,
3849449, 3788514 Siamesed port head#3824433, 3805888, 3864888, 3788519 (904, 748, 900, 758, 087, 852 and 531) Crank#3788522, 3793082, 5743014 120 Horsepower		 153M $1,490 $500 $195*
CHEVY  2.5 153 4   - Marine 62-86 GM, Mercruiser, OMC others
block#3915983, 3833045, 833035,
3849449, 3788514 Head#2778964 tall port 1 3/4" tall Crank#3788522, 3793082, 5743014 Uncommon.  Uses the same tall port head as the 181A 125 Horsepower		 153F $1,490 $500 $195*
CHEVY 3 181 4   - Marine 75-89 181, GM, OMC Mercruiser, others Two piece rear seal Block#2770087, 886 Siamesed port head#3824433, 3805888, 3864888, 3788519 (904, 748, 900, 758, 087, 852 and 531) Crank#N-393775 Starter bolt holes straight across. 135-140 HP.Also used in industrial applications also where propane is the primary fuel. When out of stock, use a 153M 181F $1,590 $700 $195*
CHEVY 3 181 4   - Marine 75-89 181, GM, OMC, Volvo Penta, Mercruiser, others Two piece rear seal Block#2770087, 886 Head#2778964 tall port 1 3/4" tall Crank#N-393775 Starter bolt holes straight across. 140HP When out of stock, use a 153F 181A $1,590 $700 $195*
CHEVY 3 181 4   - Marine 90-97 181, GM, OMC Mercruiser, others One piece rear seal Block#14097080 MEX Head#2176904, 277087, 2774531, 2776852, 2776904, 3937758, 2777770, 2778964, 14098820 1.360" tall squatty ports, wide journal crank#140968, N393775, 3941352. Takes wide powdered connecting rods. diagonal starter bolt holes, for applications with 168 tooth flywheel. 135-140HP Socket in rear of crankshaft 181B $1,590 $500 $195*
CHEVY 3 181 4   - Marine 95-2010 MCM 3.0LX-181 CID(1990-1997)& MCM 3.0L(1998&UP) for applications with 168 tooth flywheel. diagonal starter bolt holes
Narrow rod journal crank 93436083 w' flat rear hub Mercruiser, OMC, etc., but maybe not all Volvo Penta 3.0. Specify if your coupler fits snugly in a socket in the back of the crank hub.		 181C $1,590 $500 $195*
Volvo Penta 3 3.0L 6   Marine 69-78 AQ170 A, AQ 170B, AQ170C   $2,390 $500 $195
Buick 3.7 225 6   Marine 1960's-@1972 Grays Marine others, distributor in the front   $1,490 $400 $195*
Mercruiser 3.7 224 4   - Marine any 228 470 Serial number required for ordering      - $1,990 $700 $195*

6 cylinder inboard marine engines 

Make Liters CC or CID Cyl VIN Eng Code Years Description  Part Number Long Block Price$ Core Dep$ Round Trip Ship
Volvo Penta 3 3.0L 6   Marine 69-78 AQ170 A, AQ 170B, AQ170C   $2,390 $500 $195
Buick 3.7 225 6   Marine 1960's-@1972 Grays Marine others, distributor in the front   $1,490 $400 $195*
CHEVY 3.8 229  V6   - Marine 80-86 229, GM,OMC,others, distributor in the back. Extreme front of engine has two threaded bolt holes down low above the oil pan on the starboard side, but only the top one on the port side     - $1,490 $300 $195*
Buick 3.8 231 V6   Marine 72-77 Oddfire Buick, distributor in the front. the distributor cap terminals are staggered in three pairs of two   $1,390 $400 $195*
Buick 3.8 231 V6   Marine 77-81 Even fire Buick, distributor in the front. The distributor cap terminals are evenly spaced   $1,390 $400 $195*
CHEVY 4.1 250 6   Marine any Straight 6 Chevrolet 165HP     - $1,390 $300 $195*
CHEVY 4.3 262 V6   Marine 1985 Non balance shaft engine, non-roller cam. Specify if fuel pump mounts on block Block#14071177, head 1479248, 1479268, crank #1174  two piece rear seal, reverse rotation add $300   $1,390 $300 $195*
CHEVY 4.3 262 V6   Marine 1986 Non balance shaft engine, non-roller cam, 1 piece rear seal, Block #14088553,  head 1479248, 1479268 mechanical fuel pump mounts on block,  reverse rotation add $300   $1,390 $300 $195*
CHEVY 4.3 262 V6   Marine 87-91 Non balance shaft engine, roller cam Block#10066011, 14093683, Head# 14094768, 10144103, Specify if mechanical fuel pump on block,  reverse rotation add $300   $1,590 $300 $195*
CHEVY 4.3 262 V6   Marine 88-91 Non balance shaft engine, roller cam, 2 bolt lifter retainer in valley, Block# 10105867, Head#14094768, 10144103, 14099067, 12553050, 10144115, Cylinder head has wide intake face and one sending unit hole. Specify EFI or carb, specify if fuel pump mounts on block,  reverse rotation add $300   $1,590 $300 $195*
CHEVY 4.3 262 V6   Marine 88-91 Non balance shaft engine, roller cam, 2 bolt lifter retainer in valley, Block# 10105867, Head#10077626,14099064,10240209, 10238181, Cylinder head has eyebrow intake ports and 2 sending unit holes, Specify EFI or carb, specify if fuel pump mounts on block,  reverse rotation add $300   $1,590 $300 $195*
CHEVY 4.3 262 V6   Marine 92-95 Metric Vortec W/Roller Cam & balance shaft, specify number of timing cover bolts,  reverse rotation add $300   $1,690 $500 $195*
CHEVY 4.3 262 V6   Marine 92-95 Metric Vortec W/Roller Cam & w/o balance shaft, specify number of timing cover bolts,  reverse rotation add $300   $1,590 $500 $195*
CHEVY 4.3 262 V6   Marine 96-98 Vortec W/Roller Cam & balance shaft 14099099, specify number of timing cover bolts   $1,790 $500 $195*
CHEVY 4.3 262 V6   Marine 99-02 Metric Vortec W/Roller Cam & balance shaft 14099099-M specify number of timing cover bolts   $1,790 $500 $195*
CHEVY 4.3 262 V6   Marine 03-07 Metric Vortec W/Roller Cam & balance shaft, specify number of timing cover bolts   $2,390 $500 $195*
CHEVY   292 6   Marine any Straight 6 Chevy --> as of summer 2010 marine 292 cams are no longer being made, 250 I-6 cams cannot be used. We must regrind yours or use a truck camshaft     - $1,390 $400 $195*
Make Liters CC or CID Cyl VIN Eng Code Years Description  Part Number Long Block Price$ Core Dep$ Round Trip Ship

8 cylinder inboard marine engines 

Make Liters CC or CID Cyl VIN Eng Code Years Description  Part Number Long Block Price$ Core Dep$ Round Trip Ship
FORD 4.4 272 V8   Marine any Ford V8     - $1,990 $600 $195*
FORD 5 302 V8   Marine any Ford V8 flat tappet  lifters     - $1,490 $300 $195*
FORD 5 302 HO V8   Marine any Ford V8 with HO package, includes roller cam, dbl chain    - $1,790 $300 $195*
CHE    5 283 V8   Marine any Powerpack heads add $150   $1,390 $250 $195*
CHE    5 305 V8   Marine 76-85 Chevrolet V8    - $1,390 $200 $195*
CHE    5 305 V8   Marine 76-85 20% more power Hypereutetic pistons, dbl chain,  upgrade flat tappet cam. About the same power as a 350 Specify efi or carb      - $1,590 $200 $195*
CHE    5 305 V8   Marine 86-90 Chevrolet V8 Specify efi or carb reverse rotation add $200      - $1,390 $300 $195*
CHE    5 305 HO V8   Marine 86-90 20% more power Hypereutetic pistons, dbl chain,  upgrade flat tappet cam. About the same power as a 350 with better fuel economy Specify efi or carb     - $1,690 $300 $195*
CHE    5 305 V8   Marine 91-95 Chevrolet V8 Specify efi or carb   $1,590 $300 $195*
CHE    5 305 V8   Marine 96-03 Chevrolet V8 Specify efi or carb 12 bolts hold the       - $1,890 $400 $195*
CHE    5 305 V8   Marine 96-03 Vortec Chevrolet V8 Specify efi or carb 8 bolts hold the intake on      - $2,090 $500 $195*
  5 307 V8   Marine 68-75 Chevrolet V8 Crusader Mercruiser, others    - $1,290 $100 $195*
Chrysler   318 V8   Marine up to 90 Chrysler     - $1,490 $300 $195*
CHE      327 V8   Marine 62-69 Chevrolet 210 horse power     - $1,490 $300 $195*
CHE      327 V8   Marine Perf 62-69 Chevrolet 300 HP Steel crank Fuelie heads ck availability     - $1,890 $600 $195*
Chrysler   340 V8   Marine 69-72 Specify steel or cast crank check availability   $1,490 $900 $195*
OLD     5.7 350 V8   Diesel Marine  77-80      Olds diesel marine 120hp Diesel $2,390 $300 $265*
CHE    5.7 350 V8   Marine  68-85 260 HP Chevrolet 4 valve cover screws on the perimeter 2 piece rear seal, specify left or right dipstick     - $1,390 $300 $195*
CHE    5.7 350 V8   Marine 69-85  290 HP Chevrolet HO flat top pistons dbl chain Speed Pro cam Replaces 265, 283, 305, 307, 327, 350, and 400 smallblock engines. call for details  2 piece rear seal, specify left or right dipstick     - $1,580 $300 $195*
CHE    5.7 350 V8   Marine 69-85 330 HP Chevrolet HO flat top pistons dbl chain high performance cam, lightning cylinder heads, hardened pushrods, etc. Replaces 265, 283, 305, 307, 327, 350, and 400 smallblock engines.      - $2,390 $300 $195*
CHE    6.2 350/383 V8   Marine 69-85 325 HP Stroker Chevrolet HO flat top pistons dbl chain high performance cam, steel crank, hardened pushrods, etc. Replaces 6.2 marine engines.      - $2,490 $300 $195*
CHE    6.2 350/383 V8   Marine 69-85 370 HP Stroker Chevrolet HO forged flat top pistons dbl chain Speed Pro cam, Eagle forged con rods, Eagle steel crank, performance cylinder heads, hardened pushrods, etc. Replaces 283, 305, 307, 327, 350, and 400 smallblock engines.      - $3,590 $300 $195*
CHE    5.7 350 V8   Marine 86 260hp Chevrolet  4 valve cover screws on the perimeter 1 piece rear seal crankshaft      - $1,390 $400 $195*
CHE    5.7 350 V8   Marine 86 290 HP Chevrolet HO flat top pistons dbl chain Speed Pro cam 1 piece rear seal, heads 4 valve cover screws on the perimeter     - $1,680 $400 $195*
CHE    5.7 350 V8   Marine 86 350 HP Chevrolet HO flat top pistons dbl chain high performance cam, lightning cylinder heads, hardened pushrods, etc. 1 piece rear seal, heads 4 valve cover screws on the perimeter     - $2,390 $400 $195*
CHE    5.7 350/383 V8   Marine 86 325 HP Stroker Chevrolet HO flat top pistons dbl chain high performance cam, steel crank, hardened pushrods, etc. Replaces 6.2 marine engines.  1 piece rear seal, heads 4 valve cover screws on the perimeter     - $2,490 $400 $195*
CHE    5.7 350/383 V8   Marine 86 380 HP Stroker Chevrolet HO forged flat top pistons dbl chain Speed Pro cam, Eagle forged con rods, Eagle steel crank, performance cylinder heads, hardened pushrods, etc. 1 piece rear seal, heads 4 valve cover screws on the perimeter      - $3,590 $400 $195*
CHE    5.7 350 V8   Marine 87-95 270hp Chevrolet valve cover screws thru center 1 piece rear seal crankshaft specify mechanical fuel pump     - $1,490 $400 $195*
CHE    5.7 350 V8   Marine 87-95 300 HP Chevrolet HO flat top pistons dbl chain Speed Pro cam 1 piece rear seal,  valve cover screws thru center, specify mechanical fuel pump     - $1,780 $400 $195*
CHE    5.7 350 V8   Marine 87-95 350 HP Chevrolet HO flat top pistons dbl chain high performance cam, lightning cylinder heads, hardened pushrods, etc. 1 piece rear seal, heads valve cover screws thru center, specify mechanical fuel pump, 4 bolt mains      - $2,490 $500 $195*
CHE    5.7 383 V8   Marine 87-95 325 HP Stroker Chevrolet HO flat top pistons dbl chain high performance cam, steel crank, hardened pushrods, etc. Replaces 6.2 marine engines.1 piece rear seal,  valve cover screws thru center, specify mechanical fuel pump, 4 bolt mains Can replace a 350 5.7L engine     - $2,890 $500 $195*
CHE    5.7 383 V8   Marine 87-95 380 HP Stroker Chevrolet HO forged flat top pistons dbl chain Speed Pro cam, Eagle forged con rods, Eagle steel crank, performance cylinder heads, hardened pushrods, etc. 1 piece rear seal, valve cover screws thru center, specify mechanical fuel pump, 4 bolt mains Can replace a 350 5.7L engine     - $3,590 $500 $195*
CHE    5.7 350 V8   Marine 92-97 Mastercraft LT-1 only block#10125327 specify iron head#10125320, 12554290 OR aluminum heads#10128374, 10128649 OR 10239902, 1255560   $2,490 $700 $195*
CHE    5.7 350 V8   Marine 97-04 280 hp 'Chevrolet  12 bolts hold the intake on      - $1,990 $425 $195*
CHE    5.7 350 V8   Marine 97-04 320 hp Chevrolet Vortec heads 8 bolts hold the intake on     - $2,290 $600 $195*
CHE    5.7 350 V8   Marine 97-04 Chevrolet 350 hp Vortec aftermarket heads  8 bolts hold the intake on flat top pistons dbl chain high performance cam, hardened pushrods, etc. 1 piece rear seal, heads valve cover screws thru center, specify mechanical fuel pump, 4 bolt mains      - $2,890 $600 $195*
CHE    5.7 383 V8   Marine 97-04 Chevrolet 340 hp Vortec heads  8 bolts hold the intake on  forged flat top pistons dbl chain Speed Pro cam, Eagle forged con rods, Eagle steel crank, performance cylinder heads, hardened pushrods, etc. 1 piece rear seal, valve cover screws thru center, specify mechanical fuel pump, 4 bolt mains Can replace a 350 5.7L engine     - $2,590 $600 $195*
CHE    5.7 383 V8   Marine 97-04 Chevrolet 380 hp Aluminum performance Vortec heads  8 bolts hold the intake on forged flat top pistons dbl roller chain Comp Cams roller cam, Eagle forged con rods, Eagle steel crank, hardened pushrods, etc. 1 piece rear seal, valve cover screws thru center, specify mechanical fuel pump, 4 bolt mains Can replace a 350 5.7L engine     - $3,790 $600 $195*
FORD 5.8 351 V8   Marine 69-86 Ford V8 Dipstick in pan 233hp- 250 hp     - $1,490 $300 $195*
FORD 5.8 351 V8   Marine 87-91 Mercury, Mercruiser, Ford V8 Dipstick in block 233hp- 250 hp     - $1,490 $500 $195*
Chrysler   360 V8   Marine up to 90 Chrysler     - $1,490 $300 $195*
CHE    6.6 396, 402 V8   Marine 66-74 Big block Chevy 2 piece rear seal Mark 4 ~Roller rockers & pushrods  add $350~ Steel crankshaft add $200~ 365HP hydraulic cam and lifter kit add $200  Roller cam, roller lifters, etc. add $900. Brand new rectangular port heads add $900 Reverse rotation ad      - $1,890 $600 $265*
Oldsmobile 7.4 403 V8   Marine 77-81 Berkley Packajet, etc.      - $1,690 $500 $265*
CHE      427 V8   Marine up to 1990 Big block Chevy 2 piece rear seal Mark 4 ~Roller rockers & pushrods  add $350~ Steel crankshaft add $400~ 365HP hydraulic cam and lifter kit add $200  Roller cam, roller lifters, etc. add $900. Brand new rectangular port heads add $900 Reverse rotation ad      - $1,890 $900 $265*
CHRYSL  7.2 440 V8   Marine  66-72      Specify steel or cast iron crank Reverse rotation only available if your cam is regrindable add $300   $2,090 $800 $265*
CHRYSL  7.2 440 V8  - Marine  73-84      Specify steel or cast iron crank Reverse rotation only available if your cam is regrindable add $300    $2,090 $800 $265*
CHE    7.4 454 V8 GEN4 Marine 1966-1990 Big block Chevy 330-350 HP 2 piece rear seal Gen. 4 Two bolt mains fuel efficiency heads Reverse rotation add $200   $1,890 $850 $265*
CHE    7.4 454 V8 GEN4 Marine 1966-1990 Big block Chevy 365HP 2 piece rear seal Gen. 4 Two bolt mains fuel efficiency heads upgrade cam kit Reverse rotation add $200  ` $2,180 $850 $265*
CHE    7.4 454 V8 GEN4 Marine 1966-1990 Big block Chevy  385hp 2 piece rear seal Gen. 4 Four bolt mains mid-oval port heads upgrade cam kit Options-Roller rockers & pushrods add $350~ Steel crankshaft add $500 Reverse rotation add $200  ` $2,180 $1,250 $265*
CHE    7.4 454 V8 GEN4 Marine 1966-1990 Big block Chevy  420hp 2 piece rear seal Gen. 4 Four bolt mains rectangular port heads upgrade cam kit forged pistons Options- Roller rockers & pushrods  add $350~ Steel crankshaft add $500 Reverse rotation add $200  ` $2,580 $1,550 $265*
CHE    7.4 454 V8 GEN4 Marine 1966-1990 Big block Rat Chevy  450hp 2 piece rear seal Gen. 4 Four bolt mains rectangular port aluminum heads upgrade cam kit Steel crankshaft, forged pistons Options- Roller rockers & pushrods  add $350~ Reverse rotation-call for pricing ` $2,890 $2,250 $265*
CHE    7.4 454 V8 GEN5 Marine 91-95 Big block Chevy  330-350hp 1 piece rear seal Mark 5 small port efficiency cylinder heads 4 bollt mains  Reverse rotation add $200    $2,090 $900 $265*
CHE    7.4 454 V8 GEN5 Marine 91-95 Big block Chevy 365HP 1 piece rear seal Gen. 5 small port efficiency cylinder heads, Four bolt mains upgrade cam kit, Reverse rotation add $200 Roller rockers & hardened pushrods add $350~ Steel crankshaft add $500 Reverse rotation add $200    $2,380 $900 $265*
CHE    7.4 454 V8 GEN5 Marine 91-95 Big block Chevy 420 hp 1 piece rear seal GEN 5 rectangular port cylinder heads, upgrade cam kit, Reverse rotation add $200 Roller rockers & hardened pushrods add $350~ Steel crankshaft add $500 Reverse rotation add $200    $2,590 $1,550 $265*
CHE    7.4 454 V8 GEN5 Marine 91-95 Big block Chevy  450hp 1 piece rear seal GEN 5 rectangular port cylinder heads, upgrade cam kit, Steel crankshaft. Roller rockers & hardened pushrods add $350~ Reverse rotation add $200     $2,890 $2,550 $265*
CHE    7.4 454 V8 GEN6 Marine 96-06 Big block Chevy  310-350hp 1 piece rear seal Gen 6 small port efficiency cylinder heads 4 bollt mains  Reverse rotation add $300    $2,290 $1,050 $265*
CHE    7.4 454 V8 GEN6 Marine 96-06 Big block Chevy 365HP 1 piece rear seal Gen. 6 small port efficiency cylinder heads, Four bolt mains upgrade cam kit, Reverse rotation add $300 Roller rockers & hardened pushrods add $350~ Steel crankshaft add $500 Reverse rotation add $300    $2,580 $1,050 $265*
CHE    7.4 454 V8 GEN6 Marine 96-06 Big block Chevy 420 hp 1 piece rear seal Gen 6 rectangular port cylinder heads, upgrade cam kit, Reverse rotation add $300 Roller rockers & hardened pushrods add $350~ Steel crankshaft add $500    $2,590 $1,550 $265*
CHE    7.4 454 V8 GEN6 Marine 96-06 Big block Chevy 450hp 1 piece rear seal Gen 6 rectangular port cylinder heads, upgrade cam kit, Steel crankshaft. Roller rockers & hardened pushrods add $350~ Reverse rotation add $300     $2,890 $2,550 $265*
OLDS 7.5 455 V*   Marine 1968-1978 Higher compression, non-"J" heads Packajet, Jacuzzi, others   $1,890 $600 $265*
FORD 7.5 460 V8   Marine 1972-1992 340 HP'Cylinder head numbers or pictures required to order   $1,890 $600 $265*
FORD 7.5 460 V8   Marine 1972-1992 Replacement for factory Mercruiser 385 HP forged pistons, performance camshaft, valve springs, etc. Cylinder head numbers or pictures required to order   $2,590 $600 $265*
CHE    8.1 496 V8   8.1 Marine 01-03 Vortec, Block #12558110, Head #12558162, Crank #430 496M $2,990 $1,300 $265
CHE    8.1, 8.2 496 -502 V8 GEN 4 Marine 1965-1989 GEN 4 two piece rear seal Big block Chevy 380 HP high efficiency peanut port heads, very mild cam. Stroker 4.310" and 4.350"X 4.250" Steel crank   $3,690 $1,200 $265*
CHE    8.1, 8.2 496 -502 V8 GEN 4 Marine 1965-1989 GEN 4 two piece rear seal Big block Chevy  stroker 4.310" and 4.350"X 4.250" 425 HP oval port heads Steel crank   $3,890 $1,200 $265*
CHE    8.1, 8.2 496 -502 V8 GEN 4 Marine 1965-1989 GEN 4 two piece rear seal Big block Chevy  stroker 4.310" and 4.350"X 4.250" Steel crank rectangular port heads 455 hp   $4,180 $1,700 $265*
CHE    8.1, 8.2 496 -502 V8 GEN 4 Marine 1965-1989 GEN 4 two piece rear seal Big block Chevy  stroker 4.310" and 4.350"X 4.250" Aluminum rectangular port heads, forged pistons, roller rockers, Eagle rods, Steel crank 500+ hp   $4,480 $1,700 $265*
CHE    8.1, 8.2 496 -502 V8 GEN 5 Marine 1990-1995 GEN 5 one piece rear seal Big block Chevy 380 HP high efficiency peanut port heads. Very mild cam. stroker 4.350"X 4.250" Steel crank   $3,690 $1,200 $265*
CHE    8.1, 8.2 496 -502 V8 GEN 5 Marine 1990-1995 GEN 5 one piece rear seal Big block Chevy Gen 5 450 HP stroker 4.350"X 4.250" Steel crank, rectangular port iron heads   $3,690 $1,900 $265*
CHE    8.1, 8.2 496 -502 V8 GEN 5 Marine 1990-1995 GEN 5 Big block Chevy 475 hp stroker 4.310" and 4.350"X 4.250" Steel crank,  rectangular port iron heads   $3,980 $1,900 $265*
CHE    8.1, 8.2 496 -502 V8 GEN 5 Marine 1990-1995 Big block Chevy Gen 5, 500 hp stroker 4.350"X 4.250"  Steel crank,  rectangular port aluminum heads   $4,490 $1,900 $265*
CHE    8.1, 8.2 496 -502 V8 RemanGEN 6 Marine 1996-06 GEN 6 one piece rear seal Big block Chevy 380 HP high efficiency peanut port heads. Very mild cam. stroker 4.350"X 4.250" Steel crank   $3,890 $1,200 $265*
CHE    8.1, 8.2 496 -502 V8 RemanGEN 6 Marine 1996-06 GEN 6 one piece rear seal Big block Chevy Gen 5 450 HP stroker 4.350"X 4.250" Steel crank, rectangular port iron heads   $4,190 $1,900 $265*
CHE    8.1, 8.2 496 -502 V8 RemanGEN 6 Marine 1996-06 GEN 6 Big block Chevy 475 hp stroker 4.310" and 4.350"X 4.250" Steel crank,  rectangular port iron heads   $4,280 $1,900 $265*
CHE    8.1, 8.2 496 -502 V8 RemanGEN 6 Marine 1996-06 Gen6'Big block Chevy 500 hp stroker 4.350"X 4.250"  Steel crank,  rectangular port aluminum heads, roller rockers, hardened pushrods, etc., etc.   $4,790 $1,900 $265*
CHE    8.2 502 V8 NEW GEN 6 Marine 1996-06 GEN 6 Big block Chevy 380HP all new engine w' high efficiency peanut port heads mild roller cam, single roller chain, low tension piston rings, etc., etc.   $4,390 $1,700 $265*
CHE    8.2 502 V8 NEW GEN 6 Marine 1996-06 GEN 6 'Big block Chevy 420 HP rectangular port heads all new engine roller cam, Steel crank, etc.   $4,790 $1,900 $265*
CHE    8.2 502 V8 NEW GEN 6 Marine 1996-06 GEN 6 'Big block Chevy 475HP rectangular port heads all new engine roller cam Steel crank   $4,890 $1,900 $265*
CHE    8.2 502 V8 NEW GEN 6 Marine 1996-06 GEN 6 Big block Chevy 500 HP  rectangular port aluminum heads all new engine roller cam Steel crank, roller rockers, etc., etc.   $5,390 $1,900 $265*
CHE    8.2 540 V8 NEW GEN 6 Marine 1996-06 GEN 6 Big block Chevy 540 HP rectangular port aluminum heads all new engine roller cam, Steel crank,   $6,290 $1,900 $265*
CHE    8.2 540 V8 NEW GEN 6 Marine 1996-06 GEN 6 Big block Chevy 600 HP rectangular port aluminum heads all new engine roller cam Steel crank, Eagle rods   $6,990 $1,900 $265*
Make Liters CC or CID Cyl VIN Eng Code  Years  Description Motorhome  Part $ Long Block Price $ Core Deposit Round $ Trip Ship

Universal Replacement turn key engines for
Mercury, OMC, Sea Maxx, Crusader, Volvo/ Penta
 and many others including new boats

These special offerings are subject to availability and sudden price changes. It's like getting up enough nerve to talk to a girl that smiles at you in a bar. If you stand around and analyze what she's thinking and if you stop to check your breath for sweetness, the opportunity will vanish and you will be standing there with a memory of a pretty girl in your mind, sweet breath and the title to a dead boat in your pocket. 
 

Marine 4.3 Liter Chevrolet V6 Turn key 190 HP only $3990! 
 220 HP upgrade as depicted above is only $400 more ! 
Closed cooling kit add $740
Electronic TBI fuel injection add $1490
Closed cooling kit add $740


S5000111.JPG (267970 bytes) 350 chevy marine full dress2.JPG (335550 bytes)
Marine 283 Chevrolet V8 Turn key 210 HP only $4290
 Marine 5.0 liter (305)  Chev V8 Turn key 228 HP only $4290
Marine 5.0L HO (305)  Chev V8 Turn key 265 HP only $4890
 Marine 327 Chevrolet V8 Turn key 240 HP only $4490
 Fuelly Heads and HP package add $800
Marine 5.7 liter Chevrolet V8 Turn key 270 HP only $4490
Vortec 310 HP carbureted performance upgrade only $400 more
 Marine 383 6.2 L stroker Chevy V8 Turn key 325 HP only $5390

~Above small-block V8 engines are available with the options below~

Electronic TBI fuel injection add $1595.
Electronic MPI fuel injection add $2490
Closed cooling kit add $740
Reverse rotation adds $400
Remote oil filter add $95
Charging system w' pulleys, belts, 9 pin wiring harness & alternator add $490
Raw water cooling pump, crankshaft driven, w' bracket add $295


 454 marine full dress1.JPG (259267 bytes) wpe1A.jpg (97286 bytes)
Marine 396 Chevy big block V8 Turn key 375 HP only $5990
Marine 454 Chevrolet Gen 4 V8 Turn key 330 HP only $5490
Marine 454 Chevrolet Gen 4 V8 Turn key 375 HP only $5790
Marine 454 Chevrolet Gen 4 V8 Turn key 450 HP only $6790

Gen 5 engines add $200
Gen 6 engines add $400

~Above Rat Chevy engines are available with the options below~

Electronic TBI fuel injection add $1595.
Electronic MPI fuel injection add $2490
Closed cooling kit add $740
Reverse rotation adds $400
 Remote oil filter add $95
Charging system w' pulleys, belts, 9 pin wiring harness & alternator add $490
Raw water cooling pump, crankshaft driven, w' bracket add $295

!!!CALL ABOUT the 496/502 stroker sale!!!

Available in GEN 4, 5, & 6 to replace any big Chevy!!


Marine 502 Chevrolet big block V8 Turn key 475 HP  only $8290
 Marine 502 Chevrolet big block V8 Turn key 500 HP only $8890

~Above big Rat Chevy engines are available with the options below~

Electronic TBI fuel injection add $1595.
Electronic MPI fuel injection add $2490
Closed cooling kit add $985
Reverse rotation adds $600
 Remote oil filter add $95
Charging system w' pulleys, belts, 9 pin wiring harness & alternator add $490
Raw water cooling pump, crankshaft driven, w' bracket add $295
 Turnkey engines with exchange.

Each turnkey engine is fired up and hot run tested. Price includes risers and thermostat housings for different OMC, Crusader, Mercruiser, Volvo Penta, etc., applications

~FAQ shipping read me~Ocean freight takes 3 weeks depending on departure dates and runs about $450 to major terminals in most of Western Europe and Hawaii. Airfreight is usually double that. Australia and the Pacific basin is about 50% more. Turnkeys are more and cannot be shipped air freight. Export engines are bought outright as cores cannot be economically returned. 

1.800.575.6998

We can offer assistance in dressing engines or remanufacturing yours. Pull it out and hand it over to us. We can chem strip remachine, rethread, weld, surface and otherwise remanufacture pretty much whatever it is as long as parts are available. Get your checkbook out. We punch a timecard at $90 per hour and I crack the whip.

A premium marine longblock typically comes with block, crankshaft, connecting rods, head(s), lifters or cam followers, camshaft, main, rod and cam bearings, valvetrain, pistons, rings, wrist pins, valves, springs, guides, retainers, keepers, galley plugs, timing chain set or belt, seals, oil pump, gaskets and a one year unlimited hour warranty.

Longblocks, by definition, do not come with manifolds, flywheels, timing covers, balancers, slingers, eccentrics, carburetors, brackets, pick up screens or other sheet metal items, fuel, emission, electrical or ignition components.

      

 


~Read me~ 
For up-front payment on a remanufactured longblock exchange engine, add the 3 figures at the right end of the table rows above. If buying outright, cut the shipping price in half. Call about remanufactured turn key engines which usually take 30 days. Marine turnkeys may be in stock.  
Remanufactured long block engines come with 1 year / unlimited mileage warranties standard.  3 yr/50000 mile non-commercial extended warranties are $190 on engines priced under $2000, $290 if over $2000, etc.  There are no  tax/EPA charges except in Illinois.  Core refunds are sent by check after we receive your core back. Cores should be sent back within 30 days after receiving fresh engine.  Many domestic gas engines offer  HO performance packages at only $290 more.  Remanufactured shortblocks are generally $300 less than longblocks listed with core deposit at approximately 2/3 of a remanufactured longblock.
* AZ, CA, FL, ME, MT, NY, NV,  WY, UT,  add $90 to round trip shipping price in table above. 
Add $140 for OR, ID, WA. Call for AK, HI, airfreight, oceanfreight and international shipping to over 100 countries.  

Sir,
    Our premium quality remanufactured exchange longblock engine price is in the table above along with the core deposit and non-expedited round trip business freight cost. Add these three together for up front payment total* unless you want an extended warranty or a performance upgrade. The core deposit is refundable after our receipt of your old rebuildable (core) engine within 30 days**. 
*Freight prices above are to business locations or terminals. Residential delivery$35 each time. Liftgate service is $35 each time. *AZ, CA, CO, NM, NV, ID, MT, WY, UT, ME add $90 to shipping price above. WA, OR add $75, Honolulu add $275. Non-Illinois sales collect NO sales tax. For now, anyway. Call for international pricing.
   
    There are no other costs except the shipper may charge for special handling on your end, like residential pickup (usually @$72) or for metro delivery. Freight is handled through a brokerage house for best price, tracking is only available when 5 days overdue.  Please call us at 1.800.575.6998 or e-mail us at engines@remanufactured.com

 

 

 

Call anytime at 1-800-575-6998    Or fill in the boxes below and press "Send"

 

 

 

 
 

Vehicle

Engine size Inch or Liter  

Year

T.B. InjTPort / SEFI Carb

VIN

RWD FWD 4WD

Auto Trans Standard Trans

Name     

Address     

City     

State  Zip     

Phone    

E-mail    

     


We ship better than rebuilt remanufactured engines to Alabama, Alberta, Arizona, Arkansas, British Colombia, California, Colorado, Connecticut, Delaware, Florida, Georgia, Guam, Hawaii, Idaho, Iowa, Kansas, Kentucky, Louisiana, Maine, Manitoba, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Ontario, Oregon, Pennsylvania, Quebec, Rhode Island, Saskatchewan, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming - and the world. 1998 1997  1996  1995  1994  1993  1992  1991  1990  1989  1988  1987  1986  1985  1984  1983  1982  1981  1980  1979  1978  1977  1976  1975  1974  1973  1972  1971  1970  1969  1968  1967  1966  1965  1964  1963  1962  1961  1960  1959  1958  © Copyright 2007  Inc. All Rights Reserved 

World Time          World Currency Exchange

Remanufactured.com 4535 W. Sahara Ave. Suite 100A Las Vegas Nevada 89102 
Email: engines@remanufactured.com http://remanufactured.com   1.800-575-6998 ~ Eves & Weekends too. 
 

Mercedes 5 cylinder
 

Turn key fuel injected 5.7 marine engine w' closed cooling